When changing meters, please note the new features of the MID directive and the associated changeover to direct measurement - existing immersion sleeves are only permitted to a limited extent from 01.11.2016!
With its nominal flow rate of 0.6 m³ / h, this device is suitable for a heating output of approx. 11 kW. The seals and the lead seal are included with every meter. Interfaces such as M-Bus and pulse output must be ordered as options.
Nominal flow rate qp: 0.6 m³ / h
Minimum flow rate qi: 12 l / h
Maximum flow qs: 1.2 m³ / h
Nominal pressure: 16 bar
Temperature range: 15 - 90 ° C
Measuring medium: warm water
Installation location: standard return line (colder line), reprogramming to flow line is possible before commissioning according to the manufacturer's operating instructions
Installation position: horizontal, vertical
Probe diameter: 5.2 mm
Sensor cable length: 1.5 m
Nominal size: DN 15
Connection thread: G3 / 4B
Installation length: 110 mm
For further technical details, please refer to the manufacturer's operating instructions.
Product safety information
Manufacturer information:
Kamstrup A/S Deutschland
Havellandstr. 6 b
Baden-Württemberg
68309 Mannheim, Deutschland
info@kamstrup.de
https://www.kamstrup.de
