We have the meter in stock with calibration 2019 under REMAINING ITEM 2019.
When changing meters, please note the new features of the MID directive and the associated changeover to direct measurement - existing immersion sleeves are only permitted to a limited extent from 01.11.2016!
With its nominal flow rate of 0.6 m³ / h, this device is suitable for a heating output of approx. 11 kW. The seals and the lead seal are included with every meter. Interfaces such as M-Bus and pulse output must be ordered as options.
Nominal flow rate qp: 0.6 m³ / h
Minimum flow rate qi: 12 l / h
Maximum flow qs: 1.2 m³ / h
Nominal pressure: 16 bar
Temperature range: 15 - 90 ° C
Measuring medium: warm water
Installation location: standard return line (colder line), reprogramming to flow line is possible before commissioning according to the manufacturer's operating instructions
Installation position: horizontal, vertical
Probe diameter: 5.2 mm
Sensor cable length: 1.5 m
Nominal size: DN 15
Connection thread: G3 / 4B
Installation length: 110 mm
For further technical details, please refer to the manufacturer's operating instructions.
Product safety information
Manufacturer information:
Kamstrup A/S Deutschland
Havellandstr. 6 b
Baden-Württemberg
68309 Mannheim, Deutschland
info@kamstrup.de
https://www.kamstrup.de
